It's easier than you think. And we need it to upgrade your seats or put them on subscription.
Open AutoCAD and type in _PKSER to see the serial number (the underscore is mandatory). It's as easy as that!
The H-Factor
Search
Recent Posts
- Using a Non-Standard Pipe Type in HydraCALC
- Using the Hydratec Software Download Area
- Redefining Blocks
- Using HydraVIEW to Print a Pump Curve
- Saving, Reading and Matching the Top Five FIGs in Drawings
- Listing Two Sides of a Branch Line Under the Same Listing ID
- Creating a Revit Model with HydraCAD for AutoCAD
- Generating BIM Models for Revizto
- Alternate Part Numbers
- Importing Parts into HydraLIST
May 2025
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | ||||
| 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| 25 | 26 | 27 | 28 | 29 | 30 | 31 |
Recent Comments
- Jess on Using Pressure Reducing Valves
- Arthur Dove on Objectively looking at Object Snaps
- Art on Picking up Fittings, Valves and Backflows in AutoCalc
- Art on Objectively looking at Object Snaps
- James Litvak on Objectively looking at Object Snaps
- Iamjamieq on Objectively looking at Object Snaps
- Iamjamieq on Picking up Fittings, Valves and Backflows in AutoCalc
- George Ali Blackburn on Creating Your Own Templates
- George Ali Blackburn on Using Pressure Reducing Valves
- Jerome Van Kolken on Move Main, Move Line, Erase Main, and Erase Line
« Using Hide Attributes to Turn Off Pipe Diameters, etc. | Main | Using AutoCAD FLATSHOT Command to Create a 2D Representation of 3D Objects »
March 13, 2012
The comments to this entry are closed.
Comments