AutoCAD, for some inexplicable reason, removed the dialog box for the ARRAY commands in AutoCAD 2012 (and 2013)
If you want the older dialog based ARRAY command, just type in ARRAYCLASSIC!
The H-Factor
Search
Recent Posts
- Using a Non-Standard Pipe Type in HydraCALC
- Using the Hydratec Software Download Area
- Redefining Blocks
- Using HydraVIEW to Print a Pump Curve
- Saving, Reading and Matching the Top Five FIGs in Drawings
- Listing Two Sides of a Branch Line Under the Same Listing ID
- Creating a Revit Model with HydraCAD for AutoCAD
- Generating BIM Models for Revizto
- Alternate Part Numbers
- Importing Parts into HydraLIST
May 2025
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | ||||
| 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| 25 | 26 | 27 | 28 | 29 | 30 | 31 |
Recent Comments
- Jess on Using Pressure Reducing Valves
- Arthur Dove on Objectively looking at Object Snaps
- Art on Picking up Fittings, Valves and Backflows in AutoCalc
- Art on Objectively looking at Object Snaps
- James Litvak on Objectively looking at Object Snaps
- Iamjamieq on Objectively looking at Object Snaps
- Iamjamieq on Picking up Fittings, Valves and Backflows in AutoCalc
- George Ali Blackburn on Creating Your Own Templates
- George Ali Blackburn on Using Pressure Reducing Valves
- Jerome Van Kolken on Move Main, Move Line, Erase Main, and Erase Line
« Configuring AutoCAD to Save to an Earlier Drawing Format | Main | Adding a Threaded Pipe Type for AutoListing »
June 18, 2012
The comments to this entry are closed.
Comments