There are two overhauled commands in AutoCAD 2020 that are used pretty often; and that have changed considerably. One is the PURGE command, which I covered in an earlier post. The other is INSERT, which I will cover here.
Insert has changed considerably, in that it is considerably more complicated. Typing it in yields an Insert palette:
The Current Drawing tab shows all the blocks currently defined in the drawing, whether or not they have been actually inserted. From this tab, you can pick or drag and drop the blocks into the drawing.
---
The Recent tab shows you the most recently inserted blocks, giving you a smaller list to choose from. however, this requires that you set up a cloud storage system to synch with. View the Help on this tab if you want to proceed
---
To insert a block from another drawing, however, select the Libraries tab. The first time you use this command, the Libraries tab will be blank with a note to the effect of Open Block Libraries.
Picking that, you will be asked to select a drawing to access, or, you can pick the Library Book symbol, below, for this same purpose:
Picking a drawing will display all of the blocks defined within that drawing. You can drag or drop these blocks into your drawing.
If you want to insert the entire drawing, such as in the case of a background to work off of, select the very first block in the upper left. This is the entire drawing. I suggest checking the Explode and Insertion Point boxes when inserting. I do not recommend the drag and drop feature for this, as the entire drawing has to get loaded in before you can 'drop' it where you want it
Finally, now that you have been forced to read all of this, if you want to use the good old Insert command from days of yore, simply type in CLASSICINSERT to do so!
Recent Comments